8-Core 4GB+64GB Android 9" Touch Screen Car Stereo for Toyota Camry 2001-2006 | Wireless CarPlay & Android Auto | GPS Navigation | AHD Backup Camera | Mirror Link | Perfect for Commuting & Road Trips

Important Tips This machine is suitable for the on-board 12V power supply system (grounding wire is required), please do not install this machine in the 24V vehicle, otherwise the machine will be damaged. Test If the Machine is Working: A quick and easy test before installation is to confirm that the device is working properly and as intended. If there is an error step in the subsequent installation that causes it to not work. If you performed a successful test and the device does not work after installation, recheck the installation steps.The red and yellow wires of the car stereo are combined first, then connected to the positive pole of the 12V battery. The black wire is connected to the negative pole of the battery.After 2 seconds, check the car stereo, if the screen lights up, it means that the car stereo is functioning normally. Carplay/Android Auto Lets You Connect Your iPhone/Android Phone To Our 2DIN Car Stereo To Use Its Built-In Features With CarPlay/Android Auto, you can perform various tasks and access numerous functions on your phone through the touchscreen car stereo while driving! Wireless/Wired Apple Carplay (App-CPLink) Carplay is Apple's vehicle-to-machine interaction system customized specifically for iOS devices.After connecting your iPhone to our stereo via Bluetooth or your phone's original USB cable, you can enjoy the apps in your phone, such as navigation, calls, music, radio, etc. on the HD stereo touch screen.You can send various voice commands directly to Siri, such as "Call Mom", "What's the weather like tomorrow?"The biggest advantage of Carplay is that your phone screen and stereo screen work completely independently of each other. In other words, two screens display completely different content.The beauty of Carplay is that once you experience it, you can't leave it again! Wireless/Wired Android Auto (App-AndroidAuto) Android Auto is a vehicle-to-machine interconnection system created by Google specifically for Android phones (Some Samsung phones are not supported).Your Android phone needs to support Google services and have Android Auto software installed.Connect your Android phone and stereo via Bluetooth or your phone's original USB cable, and then you can operate various apps customized for your car stereo through the HD touchscreen. Similar to Carplay, your phone screen can still work independently.Android Auto directly turns your stereo into a smart large-screen touch device, all apps are customized for the car stereo, easy and convenient to control, make your driving safer.Google Voice Assistant is also always online, ready to assist you with making calls, sending messages, and more. More Unique Features 32-Band DSP Support 32-band EQ options, allows you to enjoy a superior music listening experience. Support Split Screen You can switch apps and run two apps side by side on the capacitive touch screen. 1280 x 720 Resolution Touch screen radio with 1280 x 720 screen resolution, support 1920*1080P HD video playback. Phone Mirror Link The contents of the phone can be synced to the car screen via a hotspot or an original USB cable. Rear View Camera Wiring (Optional) NOTE: Whether you are using a rearview camera or not, connect the reversing input cable (CA-MIN). Otherwise, your WiFi and Bluetooth signals will be affected! Two small antennas are attached to the reversing input cable, which have the effect of enhancing Bluetooth and WiFi signals respectively. If you have purchased a radio kit that includes a CANBUS decoder box, connect the 20-pin white port in the power cable to the Canbus itself, and the remaining 8-pin white port to the corresponding port on the back of the radio.CANBUS Matching Path: Settings - Factory Setup (Password 1234) - Can SettingsThe above two instructions only apply to radios with a CANBUS decoder box.If you are connected to an external amplifier device, please connect your amplifier equipment to the one red and one white port (AUX OUT L/R) of the RCA wiring harness; Next, connect the separate blue wire of the RCA harness to the ACC red wire of the power cable. At the top of the screen, there is a "Car Amplifier" option, please turn it on. Please double-check that the power cable port we provide matches the port of your car. If the accessories are missing or damaged, please refer them to our CS Department for processing, and we will resend them for you.